Fabrication of controlled-release polymeric microneedles containing progesterone-loaded self-microemulsions for transdermal delivery.

Progesterone (PG) has been approved for hormone replacement therapy to mitigate the risk of endometrial carcinoma. However, there has been a lack of success in oral PG due to its rapid degradation. Transdermal PG has advantages but lacks efficacy due to its poor solubility (Log p = 3.9). Therefore, this study aimed to evaluate how combining self-microemulsifying drug delivery systems (SMEDDS) and polymeric microneedles (MNs) could improve the transdermal delivery of PG in a controlled-release manner. Among PG-SMEDDS, PG-SME5 was selected for its desirable properties and stability. The two-layer polymeric MNs formulation incorporating PG-SME5 (PG-SMEDDS-tMNs) was formulated from aqueous blends of polymers as a first layer and 20% PCL as a second layer. It successfully penetrated neonatal porcine skin with the dissolution of the first layer observed within 15 min after application. In vitro skin permeation revealed that the percentage of PG which permeated the skin over 82 h using PG-SMEDDS-tMNs was higher than a PG-suspension and PG-SMEDDS. The Higuchi kinetic showed controlled release over 15 days of PG from PG-SMEDDS-tMNs. These studies suggested that incorporating PG-SMEDDS into controlled-release two-layer polymeric MNs could be a promising approach for improving the transdermal delivery of PG.

Antibody-decorated chitosan-iodoacetamide-coated nanocarriers for the potential delivery of doxorubicin to breast cancer cells.

Using an active targeting approach of chemotherapeutics-loaded nanocarriers (NCs) with monoclonal antibodies is a potential strategy to improve the specificity of the delivery systems and reduce adverse reactions of chemotherapeutic drugs. Specific targeting of the human epidermal growth factor receptor-2 (HER-2), expressed excessively in HER-2-positive breast cancer cells, can be achieved by conjugating NCs with an anti-HER-2 monoclonal antibody. We constructed trastuzumab-conjugated chitosan iodoacetamide-coated NCs containing doxorubicin (Tras-Dox-CHI-IA-NCs) as a tumor-targeted drug delivery system, during the study. Chitosan-iodoacetamide (CHI-IA) was synthesized and utilized to prepare trastuzumab-conjugated NCs (Tras-NCs). The morphology, physicochemical properties, drug loading, drug release, and biological activities of the NCs were elucidated. The Tras-NCs were spherical, with a particle size of approximately 76 nm, and had a positive zeta potential; after incorporating the drug, the size of the Tras-NC increased. A prolonged, 24-h drug release from the NCs was achieved. The Tras-NCs exhibited high cellular accumulation and significantly higher antitumor activity against HER-2-positive breast cancer cells than the unconjugated NCs and the drug solution. Therefore, Tras-Dox-CHI-IA-NCs could be a promising nanocarrier for HER-2-positive breast cancer.

Optimization of In Situ Gel-Forming Chlorhexidine-Encapsulated Polymeric Nanoparticles Using Design of Experiment for Periodontitis.

Periodontitis is a chronic inflammatory disease of the gums caused by pathogenic microorganisms damaging and destroying periodontal tissues. Chlorhexidine digluconate (CHX) is a commonly used antimicrobial agent for the treatment of periodontitis. However, it has many drawbacks, such as toxicity due to the high dosage required, low prolonged release, and low adhesion in the periodontal pocket. The objective of this study was to develop and optimize CHX-encapsulated polymeric nanoparticles (NPs) loaded into in situ gel-forming (ISGF) using design of experiment (DoE) to improve the treatment of periodontitis and overcome these limitations. CHX-NPs were optimized from 0.046%w/v chitosan, 0.05%w/w gelatin, and 0.25%w/w CHX. After that, the optimized of CHX-NPs was loaded into a thermosensitive ISGF, which was a mixture of 15%w/v Poloxamer 407 and 1% hydroxypropyl methylcellulose (HPMC). The optimized CHX-NPs, loaded into ISGF, was evaluated by measuring gelling temperature and time, pH, viscosity, compatibility, in vitro drug release, antibacterial activity, cytotoxicity, and stability. The results showed that the size, PDI, and zeta potential of optimized CHX-NPs were 53.07±10.17 nm, 0.36±0.02, and 27.63±4.16 mV, respectively. Moreover, the optimized ISGF loading CHX-NPs showed a gelling temperature at 34.3±1.2°C within 120.00±17.32 s with a pH value of 4.06. The viscosity of the formulations at 4°C was 54.33±0.99 cP. The DSC and FTIR showed no interaction between ingredients. The optimal formulations showed a prolonged release of up to 7 days while providing potential antibacterial activity and were safe for normal gingival fibroblast cells. Moreover, the formulations had high stability at 4°C and 25°C for 3 months. In conclusion, the study achieved the successful development of ISGF loading CHX-NPs formulations for effectiveness use in periodontal treatment.

Development of invaethosomes and invaflexosomes for dermal delivery of clotrimazole: optimization, characterization and antifungal activity.

The objective of this study was to develop novel invaethosomes (I-ETS) and invaflexosomes (I-FXS) to enhance the dermal delivery of clotrimazole (CZ). Twenty model CZ-loaded I-ETS and I-FXS formulations were created according to a face-centered central composite experimental design. CZ-loaded vesicle formulations containing a constant concentration of 0.025% w/v CZ and various amounts of ethanol, d-limonene, and polysorbate 20 as penetration enhancers were prepared using the thin film hydration method. The physicochemical characteristics, skin permeability, and antifungal activity were characterized. The skin permeability of the experimental CZ-loaded I-ETS/I-FXS was significantly higher than that of conventional ethosomes, flexosomes, and the commercial product (1% w/w CZ cream). The mechanism of action was confirmed to be skin penetration of low ethanol base vesicles through the disruption of the skin microstructure. The optimal I-ETS in vitro antifungal activity against C. albicans differed significantly from that of ETS and the commercial cream (control). The response surface methodology predicted by Design Expert® was helpful in understanding the complicated relationship between the causal factors and the response variables of the 0.025% w/v CZ-loaded I-ETS/I-FXS formulation. Based on the available information, double vesicles seem to be promising versatile carriers for dermal drug delivery of CZ.

Rapid Microwave-Assisted Synthesis of pH-Sensitive Carbon-Based Nanoparticles for the Controlled Release of Doxorubicin to Cancer Cells.

Carbon-based nanoparticles (CNPs) are a new type of interesting nanomaterials applied in various pharmaceutical fields due to their outstanding biocompatible properties. Novel pH-sensitive CNPs were rapidly synthesized within 1 min by microwave-assisted technique for doxorubicin (DOX) delivery into five cancer cell lines, including breast cancer (BT-474 and MDA-MB-231 cell lines), colon cancer (HCT and HT29 cell lines), and cervical cancer (HeLa cell lines). CNPs and DOX-loaded CNPs (CNPs-DOX) had nano-size of 11.66 ± 2.32 nm and 43.24 ± 13.25 nm, respectively. DOX could be self-assembled with CNPs in phosphate buffer solution at pH 7.4 through electrostatic interaction, exhibiting high loading efficiency at 85.82%. The release of DOX from CNPs-DOX at pH 5.0, often observed in the tumor, was nearly two times greater than the release at physiological condition pH 7.4. Furthermore, the anticancer activity of CNPs-DOX was significantly enhanced compared to free DOX in five cancer cell lines. CNPs-DOX could induce cell death through apoptosis induction in MDA-MB-231 cells. The findings revealed that CNPs-DOX exhibited a promising pH-sensitive nano-system as a drug delivery carrier for cancer treatment.

Chitosan capped-gold nanoparticles as skin penetration enhancer for small molecules: A study in porcine skin.

Skin is considered one of the most convenient sites for drug administration. The present study evaluated the effect of gold nanoparticles stabilized by chitosan (CS-AuNPs) and citrate ions (Ci-AuNPs) on skin permeation of sodium fluorescein (NaFI) and rhodamine b base (RhB) as small model hydrophilic and lipophilic permeants, respectively. CS-AuNPs and Ci-AuNPs were characterized by transmitted electron microscopy (TEM) and dynamic light scattering (DLS). Skin permeation was investigated using porcine skin with diffusion cells and confocal laser scanning microscopy (CLSM). The CS-AuNPs and Ci-AuNPs were spherical-shaped nanosized particles (38.4 ± 0.7 and 32.2 ± 0.7 nm, respectively). The zeta potential of CS-AuNPs was positive (+30.7 ± 1.2 mV) whereas that of Ci-AuNPs was negative (-60.2 ± 0.4 mV). The skin permeation study revealed that CS-AuNPs could enhance the permeation of NaFI with enhancement ratio (ER) of 38.2 ± 7.5, and the effect was superior to that of Ci-AuNPs. CLSM visualization suggested that skin permeation was enhanced by improving the delivery through the transepidermal pathway. However, the permeability of RhB, a lipophilic molecule, was not significantly affected by CS-AuNPs and Ci-AuNPs. Moreover, CS-AuNPs had no cytotoxic toward human skin fibroblast cells. Therefore, CS-AuNPs are a promising skin permeation enhancer of small polar compounds.

Fabrication of polyvinyl pyrrolidone-K90/Eudragit RL100-based dissolving microneedle patches loaded with alpha-arbutin and resveratrol for skin depigmentation.

Alpha-arbutin (AA) and resveratrol (Res) are widely used in skin-lightening products. However, current topical formulations have minimal skin-lightening effects due to the low absorption and poor solubility of these active compounds. This study investigated the efficacy and safety of using dissolving microneedle (DMN) patches to improve the delivery of AA and Res for skin depigmentation. The DMN patches (F0-F3) fabricated from polyvinyl pyrrolidone-K90 (PVP-K90)/Eudragit RL100 blends successfully penetrated excised porcine skin and showed sufficient mechanical strength to resist compression forces. Loading DMNs with 10% AA and 2% Res at a ratio of 5 : 1 (F3) resulted in a synergistic interaction between the drugs with desirable dissolving ability, drug loading, and stability. Furthermore, both in vitro and in vivo studies revealed that the use of F3 DMN patches successfully enhanced the intradermal delivery of AA and Res over a 24 h period, with the delivered amount being higher (∼2.6 times) than that provided by a cream formulation (P < 0.05). After removing the DMN patches, the mice's skin was spontaneously and completely resealed within 12 h. In clinical studies, F3 DMN patches slightly decreased the melanin index of the participants without causing skin irritation or erythema at any time during the 24 h period when the patches were applied (P < 0.05). Moreover, application of the patches for 24 h was not found to affect skin hydration, transepidermal water loss, or skin elasticity. Therefore, AA/Res-loaded DMN patches could offer a promising approach for the effective local delivery of cosmetic agents for skin depigmentation.

Development and Skin Penetration Pathway Evaluation Using Confocal Laser Scanning Microscopy of Microemulsions for Dermal Delivery Enhancement of Finasteride.

This study aimed to develop microemulsions using poloxamer 124 as a surfactant to improve the skin penetration of finasteride and to investigate the skin penetration pathways of these microemulsions by colocalization techniques using confocal laser scanning microscopy (CLSM). The prepared finasteride-loaded microemulsions had average particle sizes ranging from 80.09 to 136.97 nm with particle size distributions within acceptable ranges and exhibited negative surface charges. The obtained microemulsions could significantly increase the skin penetration of finasteride compared to a finasteride solution. According to the skin penetration pathway evaluation conducted with CLSM, the microemulsions were hair follicle-targeted formulations due to penetration via the transfollicular pathway as a major skin penetration pathway. Additionally, this study found that the microemulsions also penetrated via the intercluster pathway more than via the intercellular pathway and transcellular pathway. The intercluster pathway, intercellular pathway, and transcellular pathway were considered only minor pathways.

Mussel-inspired poly(hydroxyethyl acrylate-co-itaconic acid)-catechol/hyaluronic acid drug-in-adhesive patches for transdermal delivery of ketoprofen.

This research aimed to create new hydrophilic drug-in-adhesive patches for transdermal drug delivery. Poly(hydroxyethyl acrylate-co-itaconic acid)-catechol (PHI-cat) and hyaluronic acid (HA) were used as main components in the pressure-sensitive adhesive. Citric acid and aluminium hydroxide were exploited as crosslinking agents and ketoprofen was employed as a model delivering compound. The adhesive performance, physicochemical properties, drug-polymer interaction, drug crystallization, drug content, drug permeation through the skin, and coordination polymer network of the patches were investigated. In addition, skin irritation and adhesion potential in human subjects were assessed. Due to the ability of catechol groups to form interaction with the skin tissue, the patches containing PHI-cat and HA offered a considerably greater adhesion ability to human skin compared with the patches without catechol and commercial patches. Furthermore, the patches had good physical and chemical stability. Therefore, these catechol-functionalized patches may be potential transdermal drug delivery systems with excellent adhesive properties for the delivery of a drug through the skin.

Bioinspired ketoprofen-incorporated polyvinylpyrrolidone/polyallylamine/ polydopamine hydrophilic pressure-sensitive adhesives patches with improved adhesive performance for transdermal drug delivery.

Inspired by the natural mussel adhesive mechanism, three different materials-polydopamine (PDA), polyvinylpyrrolidone (PVP), and polyallylamine (PAM)-were used to make innovative pressure-sensitive adhesives (PSAs) for transdermal delivery of ketoprofen. PDA was synthesized under alkaline conditions using a self-polymerization reaction and was exploited as a cross-linking agent due to its biocompatibility. The adhesive performance, physicochemical properties, drug content, and drug permeation through the skin were examined. Moreover, in vivo skin irritation and skin adhesion performance were investigated. PVP/PAM/PDA PSAs showed a significantly higher adhesion to human skin compared with commercial patches owing to the interaction between the catechol groups presented on the patches and the skin. In addition, the patches were stable for six months. Consequently, the PVP/PAM/PDA patches exhibited outstanding tissue adhesiveness, enabling universal tissue adherence while causing no skin tissue irritation or inflammatory reaction.

The utilization of mangosteen pericarp extract for anticoccidial drug replacement in broiler feed.

The use of anticoccidial drugs in broilers has led to concerns, especially the drug residues in meat and the occurrence of drug resistance. This study aimed to extract, standardize, quantify and utilize mangosteen pericarp extract (MPE) containing α-mangostin as a replacement for anticoccidial drugs in broiler feed. The pericarp was acquired from different areas of Thailand and used for extraction and standardization. The antioxidant activity of the extract was evaluated. The extract was formulated into granules, and the flowability and stability of the granules were assessed. The MPE formulation was added to the broiler feed and then fed to the broilers that were infected with Eimeria tenella. The growth rate and intestinal lesion score (post-mortem) of the broilers were assessed. The pericarp obtained passed the identification test and phytochemical analyses. The active compound, α-mangostin, was best extracted using 95% ethanol. The MPE had superior antioxidant activity compared to standard antioxidants. Granules of the extract formulated with Avicel® PH102 provided desirable flowability and stability. The broilers fed with the feed containing 500 mg/kg α-mangostin showed a similar growth rate and post-mortem lesion score compared with the control group and those that received feed containing 60 mg/kg salinomycin. Our findings demonstrated that MPE with a high content of the active compound could be developed and used in place of anticoccidial drugs in the broiler feed.

In Vitro Biological Activity and In Vivo Human Study of Porcine-Placenta-Extract-Loaded Nanovesicle Formulations for Skin and Hair Rejuvenation.

Porcine placenta extract (PPE) contains many water-soluble macromolecular compounds, such as proteins and growth factors, which have limited transportation through the skin. This study aimed to assess the effect of porcine-placenta-extract (PPE)-loaded nano-transdermal systems for skin repair and hair growth promotion. The potentials of the nanoformulation for cytotoxicity, cell proliferation, intracellular reactive oxygen species (ROS) reduction, lipoxygenase inhibition, intracellular inflammatory cytokine reduction, and cell aggregation were evaluated. PPE-entrapped niosome nanovesicles were produced by thin-film hydration and probe-sonication methods, followed by incorporation in a skin serum formulation. The physicochemical properties of the formulation were examined, and the efficacy of the serum formulation was elucidated in humans. The results showed that PPE had no toxicity and was able to induce cell growth and cell aggregation. In addition, PPE significantly decreased intracellular ROS, inhibited lipoxygenase activity, and reduced the production of intracellular tumor necrosis factor-α. In the in vivo human study, the PPE nanovesicles-loaded serum could improve skin properties by increasing skin hydration. Moreover, it was capable of promoting hair growth by increasing hair elongation and melanin index after application for one month. Consequently, the PPE nanovesicles-loaded serum was effective for skin anti-aging and hair rejuvenation.

A Novel Approach for Skin Regeneration by a Potent Bioactive Placental-Loaded Microneedle Patch: Comparative Study of Deer, Goat, and Porcine Placentas.

The aims of this study were to investigate the skin regeneration potential of bioactive placenta (deer placenta (DP), goat placenta (GP), and porcine placenta (PP)) and fabricate bioactive extract-loaded dissolving microneedles (DMNs) as a dermal delivery approach. The placentas were water-extracted, and the active compounds were evaluated. Bioactivity studies were performed in dermal fibroblasts and keratinocytes. DMNs were fabricated to deliver the potent bioactive placenta extract into the skin. All placental extracts expressed high amounts of protein, growth factors (EGF, FGF, IGF-1 and TGF-ß1), and amino acids. These extracts were not toxic to the skin cells, while the proliferation of fibroblast cells significantly increased in a time-dependent manner. GP extract that exhibited the maximum proliferation, migration, and regeneration effect on fibroblast cells was loaded into DMN patch. The suitable physical properties of DMNs led to increased skin permeation and deposition of bioactive macromolecules. Moreover, GP extract-loaded DMNs showed minimal invasiveness to the skin and were safe for application to human skin. In conclusion, placental extracts act as potent bioactive compounds for skin cells, and the highest bioactive potential of GP-loaded DMNs might be a novel approach to regenerate the skin.

Formulation and Optimal Design of Dioscorea bulbifera and Honey-Loaded Gantrez®/Xyloglucan Hydrogel as Wound Healing Patches.

Hydrogel patches are some of the most effective dressings for wound healing. In this study, the Gantrez® S-97 (Gan)/xyloglucan (XG) hydrogel patches were formulated by using a full central composite design (CCD). The optimized hydrogel patches consisted of 17.78% w/w of Gan and 0.1% w/w of XG. Honey and D. bulbifera extract were loaded in the Gan/XG hydrogel patches. The physical properties of the hydrogel patches, including water content, water absorption, rate of water vapor transmission, and mechanical properties, were examined. The D. bulbifera extract/honey-loaded patch exhibited a higher value of water absorption, tensile strength, and elongation than the honey-loaded patch and the unloaded patch, respectively. The biological activities of the patches were also investigated. All hydrogel patches protected wounds from external bacterial infection. The D. bulbifera extract/honey-loaded patch exhibited stronger antioxidant activity than the honey-loaded patch and the unloaded patch. Besides, all the hydrogel patches with concentrations of 0.5-2.5 mg/mL showed that they were nontoxic to fibroblast cells. The combination of D. bulbifera extract and honey in the patch affected fibroblast proliferation. In addition, all Gan/XG hydrogel patches significantly induced recovery of the scratch area. Therefore, the Gan/XG hydrogel patches could be candidates as wound dressings.

Maleimide-functionalized carboxymethyl cellulose: A novel mucoadhesive polymer for transmucosal drug delivery.

The objective of this research was to develop a novel mucoadhesive polymer for drug delivery applications based on N-(2-aminoethyl) maleimide-functionalized carboxymethyl cellulose in which the weight ratios of the materials were tuned to explore the condition providing the highest maleimide content on the polymer. The polymers were synthesized from N-(2-aminoethyl) maleimide that was conjugated to carboxymethyl cellulose with their mucoadhesive properties examined by tensile testing, rheology, and flow-through analysis and their biocompatibilities evaluated on the human gingival fibroblast cell line (HGF-1). The anti-inflammatory drug benzydamine was loaded into mucoadhesive-polymer-based tablets and used to demonstrate the application of the synthesized polymer. The polymer exhibited superior mucoadhesive capability compared to carboxymethyl cellulose through the interaction between maleimide moiety and mucin. The functionalized polymer also possessed the ability to control the release of benzydamine with Higuchi's release model and was proven to be a potential candidate in mucoadhesive drug delivery.

Optimal Design of Novel Microemulsions-Based Two-Layered Dissolving Microneedles for Delivering Fluconazole in Treatment of Fungal Eye Infection.

The optimal design of novel microneedles (MNs) for the ocular delivery system is necessary and useful for improving the effectiveness of medication. The objective of this study was to design and develop the optimal fluconazole (FLUZ)-microemulsions (MEs)-loaded two-layered dissolving MNs as a potential treatment for fungal eye infection. The experimental designs using the simplex-lattice design were used to select the optimal formulation. The two-layered dissolving MNs were fabricated from 3% chitosan and 20% polyvinyl alcohol (PVA) in a weight ratio of 1:4 as an outer layer and FLUZ-loaded MEs containing eugenol, tween 80, PEG400, and water as an inner layer. The physical appearance, mechanical properties, penetration ability, dissolution time, in vitro/ex vivo ocular drug delivery, and antifungal activity were evaluated. From the results, the optimal two-layered dissolving MNs exhibited good physical properties, complete insertion, minimally invasive ocular tissue, and high stability at 4 °C and 25 °C for 3 months. Moreover, the optimal two-layered dissolving MNs showed significantly higher FLUZ permeation into the ocular tissue than other formulations, while providing highly potential antifungal activity. In conclusion, the optimal MEs-loaded two-layered MNs' formulation had appropriate properties for ocular delivery of FLUZ, resulting in an improvement of fungal keratitis treatment.

Synthesis of Polyethylene Glycol Diacrylate/Acrylic Acid Nanoparticles as Nanocarriers for the Controlled Delivery of Doxorubicin to Colorectal Cancer Cells.

Doxorubicin (Dox) is known for its potential to deliver desirable anticancer effects against various types of cancer including colorectal cancer. However, the adverse effects are serious. This study aimed to synthesize polyethylene glycol diacrylate (PEGDA)/acrylic acid (AA)-based nanoparticles (PEGDA/AA NPs) for Dox delivery to colorectal cancer cells. The NPs were synthesized using free-radical polymerization reaction using the monomers PEGDA and AA with their physical properties, drug loading and release, biocompatibility, and anticancer effect evaluated. The NPs were spherical with a size of around 230 nm, with a 48% Dox loading efficiency and with loading capacity of 150 µg/mg. Intriguingly, the NPs had the ability to prolong the release of Dox in vitro over 24 h and were non-toxic to intestinal epithelial cells. Dox-loaded PEGDA/AA NPs (Dox-NPs) were able to effectively kill the colorectal cancer cell line (HT-29) with the Dox-NPs accumulating inside the cell and killing the cell through the apoptosis pathway. Overall, the synthesized PEGDA/AA NPs exhibit considerable potential as a drug delivery carrier for colon cancer-directed, staged-release therapy.

Design and Optimization of 3D-Printed Gastroretentive Floating Devices by Central Composite Design.

This study aimed to optimize the size of capsule-shaped 3D-printed devices (CPD) using an experimental design by the response surface methodology to provide a gastroretentive drug delivery system (GRDDS) with optimal floating time. The CPD was fabricated using a fused deposition modeling (FDM) 3D printer. The central composite design was employed for the optimization of the devices. The morphology of the CPD was observed using a digital microscope and scanning electron microscope (SEM). The in vitro floating time and drug release were evaluated using a USP dissolution apparatus II. Appropriate total floating time (TFT) of the devices (more than 3 h) was obtained with the device's body, cap, and bottom thickness of 1.2, 1.8, and 2.9 mm, respectively. The release kinetics of the drug from the devices fitted well with zero-order kinetics. In conclusion, the optimization of CPD for GRDDS using the experimental design provided the devices with desirable floating time and ideal drug release characteristics.

Development and Evaluation of Novel Water-Based Drug-in-Adhesive Patches for the Transdermal Delivery of Ketoprofen.

The objective of this study was to develop novel water-based drug-in-adhesive pressure-sensitive adhesives (PSAs) patches for the transdermal delivery of ketoprofen, employing poly(N-vinylpyrrolidone-co-acrylic acid) copolymer (PVPAA) and poly(methyl vinyl ether-alt-maleic anhydride) (PMVEMA) as the main components. The polymers were crosslinked with tartaric acid and dihydroxyaluminium aminoacetate using various polymer ratios. Ketoprofen was incorporated into the PVPAA/PMVEMA PSAs during the patch preparation. The physicochemical properties, adhesive properties, drug content, release profile, and skin permeation of the patches were examined. Moreover, the in vivo skin irritation and skin adhesion performance in human volunteers were evaluated. The patches prepared at a weight ratio of PVPAA/PMVEMA of 1:1 presented the highest tacking strength, with desirable peeling characteristics. The ketoprofen-loaded PVPAA/PMVEMA patches exhibited superior adhesive properties, compared to the commercial patches, because the former showed an appropriate crosslinking and hydrating status with the aid of a metal coordination complex. Besides, the permeated flux of ketoprofen through the porcine skin of the ketoprofen-loaded PVPAA/PMVEMA patches (4.77 ± 1.00 µg/cm2/h) was comparable to that of the commercial patch (4.33 ± 0.80 µg/cm2/h). In human studies, the PVPAA/PMVEMA patches exhibited a better skin adhesion performance, compared with the commercial patches, without skin irritation. In addition, the patches were stable for 6 months. Therefore, these novel water-based PSAs may be a potential adhesive for preparing drug-in-adhesive patches.

Feasibility of chitosan-based nanoparticles approach for intranasal immunisation of live attenuated Japanese encephalitis vaccine.

Intranasal (IN) administration, a non-invasive route, is explored to overcome the limitations of conventional subcutaneous (SC) injection for Japanese encephalitis (JE) immunisation. Mucoadhesive nanoparticles (NPs) are recognised for the benefits they offer via IN delivery, such as extended retention time of the vaccine on the mucosa. The purpose of this study was to evaluate immunisation effect of live attenuated Japanese encephalitis-chimeric virus vaccine (JE-CV)-loaded mucoadhesive NPs based on chitosan (CS) or chitosan maleimide (CM), a novel mucoadhesive polymer, via the IN route to improve the mucosal immunisation against JE. The results revealed that IN immunisation stimulated seroprotection following PRNT50 evaluation. Moreover, compared with SC immunisation, IN immunisation in mice provided a higher sIgA level, leading to improved mucosal immune response. In addition, chitosan-based NPs showed an adjuvant effect on the IN vaccine due to their mucoadhesive and antigen-uptaken properties. CM NPs successfully induced sIgA. In contrast, SC JE-CV immunisation induced negligible mucosal immunity. These immunological advantages revealed that JE-CV-loaded mucoadhesive NPs are a promising approach for IN vaccination as an alternative route for JE protection due to the stimulatory effects on both mucosal and systemic immune responses.